| ITEM | D 650 / i 4800 | |||||
| Injection Unit | A | B | C | D | ||
| Screw Diameter | mm | 80 | 85 | 90 | 95 | |
| Screw L/D Ratio | L/D | 23.4 | 22 | 20.8 | 18.7 | |
| Shot Size(Theoretical) | cm3 | 2242 | 2531 | 2837 | 3503 | |
| Shot Weight (ps) | gm | 2040 | 2303 | 2582 | 3188 | |
| Injection Pressure | MPa | 220 | 195 | 174 | 141 | |
| Injection Rate into air | gm/sec | 382/462 | 431/522 | 484/585 | 597/722 | |
| Injection Speed | mm/s | 84/101 | ||||
| Screw Speed | rpm | 156/189 | ||||
| Clamping Force | KN | 6500 | ||||
| Clamping Stroke | mm | 940 | ||||
| Space Between Tie Bar | mm | 920×920 | ||||
| Max. Mold Height | mm | 940 | ||||
| Min. Mold Height | mm | 400 | ||||
| Max. daylight | mm | 1880 | ||||
| Eject Stroke | mm | 260 | ||||
| Force | Kn | 182 | ||||
| No. Of Ejector Pins | piece | 21 | ||||
| Mold Platen Dimension ( W X H ) | mm | 1340×1340 | ||||
| Max. Pump Pressure | Mpa | 17.5 | ||||
| Pump Motor Power | KW | 56/67 | ||||
| Heater Power | KW | 39/48 | ||||
| Oil Tank Capacity | L | 950 | ||||
| Machine Weight | T | 25.5 | ||||
| Machine Dimension ( L X W X H ) | m | 9.15×2.00×2.30 | ||||
STM BRAND D 650 /I 4800 Automatic Microprocessor Controlled Plastic Injection Molding Machine