| Item | Unit | D 200/850 | ||
| Injection Unit | Screw Diameter | mm | 50 | 55 |
| Screw L/D Ratio | L/D | 20 | 18.2 | |
| Theoretical Shot Volume | cm3 | 442 | 535 | |
| Injection Weight (RPVC) | Gms | 574 | 695 | |
| Injection Pressure | MPa | 185.4 | 150.2 | |
| Injection Rate into air ( RPVC ) | cm3/s | 172.6 | 208.8 | |
| Injection Stroke | mm | 225 | 225 | |
| Screw Speed | rpm | 151 | 151 | |
| Clamping Unit | Clamping Force | KN | 2000 | |
| Clamping Stroke | mm | 540 | ||
| Space Between Tie Bar | mm | 530 X 530 | ||
| Max. Mold Height | mm | 560 | ||
| Min. Mold Height | mm | 220 | ||
| Eject Stroke | mm | 150 | ||
| Eject Force | KN | 67 | ||
| No. Of Ejector Pins | piece | 5 | ||
| Others | Max. Pump Pressure | MPa | 17.5 | |
| Pump Motor Power | KW | 20 | ||
| Heater Power | KW | 9.7 | ||
| Oil Tank Capacity | L | 300 | ||
PVC D 200/I 850 T Automatic Microprocessor Controlled Plastic Injection Molding Machine