| Item | Unit | D 450/3200 | ||
| Injection Unit | Screw Diameter | mm | 75 | 80 |
| Screw L/D Ratio | L/D | 20 | 20.6 | |
| Theoretical Shot Volume | cm3 | 1741 | 1980 | |
| Injection Weight (RPVC) | Gms | 2263 | 2574 | |
| Injection Pressure | MPa | 184.8 | 162.4 | |
| Injection Rate into air ( RPVC ) | cm3/s | 389.8 | 443.5 | |
| Injection Stroke | mm | 394 | 394 | |
| Screw Speed | rpm | 109 | 109 | |
| Clamping Unit | Clamping Force | KN | 4500 | |
| Clamping Stroke | mm | 750 | ||
| Space Between Tie Bar | mm | 780 X 780 | ||
| Max. Mold Height | mm | 780 | ||
| Min. Mold Height | mm | 300 | ||
| Eject Stroke | mm | 200 | ||
| Eject Force | KN | 124 | ||
| No. Of Ejector Pins | piece | 17 | ||
| Others | Max. Pump Pressure | MPa | 17.5 | |
| Pump Motor Power | KW | 43 | ||
| Heater Power | KW | 21.5 | ||
| Oil Tank Capacity | L | 780 | ||
PVC D 450 /I 450 T Automatic Microprocessor Controlled Plastic Injection Molding Machine